XLP/CPE Control Cable - Multi Conductor

INDUSTRIAL TRAY CABLE
600 Volts, 90°C Wet or Dry

---

Conductor:	Tinned, annealed copper per ASTM B33. Class B stranding per ASTM B8.
Sizes:	#14 AWG – #10 AWG
Insulation:	Extruded flame-retardant cross-linked polyolefin (XLP).
Cable:	Conductors cabled together with fillers as needed to form a round core. A binder tape is applied over the core.
Color Code:	E1 Per ICEA S-73-532 Table E1 (Old K1) E2 Per ICEA S-73-532 Table E2 (Old K2) (See Technical section for color code tables)
Jacket:	Flame-retardant, sunlight resistant, ER rated Chlorinated Polyethylene (CPE).
Options:	Available with class K stranding per ASTM B174. Available with class H stranding per ASTM B173. Available with bare copper conductors. Available with copper tape shield.

---

For use as a 600 volt, multi conductor control cable where flame-retardance, and moisture/chemical resistance is critical. Cable can be installed in free air, in raceways or direct burial. The cable is also approved for wet or dry locations as well as Class 1 Division II industrial hazardous locations per NEC 501-4(b) for (UL) Type tray cables (TC).

---

Temperature rating of 90°C wet or dry. Insulation provides excellent electrical, thermal, and physical properties, excellent flame resistance and resistant to crush, compression, cuts and heat deformation. Also conductor insulation provides good low temperature (-40°C) cold bend characteristics.

---

Insulated Conductor: – XHHW-2, VW-1
Cable: – Direct Burial, sunslight resistant, ER rated
UL Type TC, 90°C Wet or Dry, 600V
Passes UL 1277 Flame Test (70,000 BTU/hr)
Passes IEEE 383 Flame Test (70,000 BTU/hr)
ICEA S-68-516, 90°C Wet or Dry, 600V & 1000V
Passes IEEE 1202 Flame Test (70,000 BTU/hr)
Passes ICEA T-29-520 Flame Test (210,000 BTU/hr)

---

XLP/CPE Control Cable - Multi Conductor

AWG	Number of Conductors	Insulation Thickness	Jacket Thickness	Overall Diameter	Weight lbs/1000 ft
14*	2	0.030	0.045	.235x.365	70
14	3	0.030	0.045	0.390	85
14	4	0.030	0.045	0.425	105
14	5	0.030	0.045	0.445	125
14	7	0.030	0.045	0.505	175
14	9	0.030	0.060	0.600	230
14	12	0.030	0.060	0.670	295
14	15	0.030	0.060	0.735	360
14	19	0.030	0.060	0.810	440
14	25	0.030	0.080	0.950	600
14	37	0.030	0.080	1.120	840
12*	2	0.030	0.045	.250x.410	95
12	3	0.030	0.045	0.430	120
12	4	0.030	0.045	0.470	150
12	5	0.030	0.045	0.495	180
12	7	0.030	0.060	0.600	250
12	9	0.030	0.060	0.665	320
12	12	0.030	0.060	0.750	410
12	15	0.030	0.060	0.820	490
12	19	0.030	0.080	0.950	660
12	25	0.030	0.080	1.060	840
12	37	0.030	0.080	1.250	1180
10*	2	0.030	0.045	.275x.460	130
10	3	0.030	0.045	0.480	160
10	4	0.030	0.060	0.560	220
10	5	0.030	0.060	0.590	260
10	7	0.030	0.060	0.665	350
10	9	0.030	0.060	0.745	440
10	12	0.030	0.080	0.880	600
10	15	0.030	0.080	0.960	735
10	19	0.030	0.080	1.060	910
10	25	0.030	0.080	1.190	1170
10	37	0.030	0.080	1.410	1680

Dimensions and weights shown are nominal, subject to industry tolerances. Dimensions and weights for other cable configurations are available upon request.

*Flat construction, ER rating does not apply.

Tel: 1-800-645-9473
Fax: 717-845-2501
Email: sales@continentalwire.com