XLP/CPE Thermocouple Cable

INDUSTRIAL TRAY CABLE
600 Volts, 90°C Wet or Dry

---

Conductor:	Thermocouple alloy per ANSI MC 96.1 – 1982.
Sizes:	#20 AWG – #16 AWG
Insulation:	Extruded flame-retardant cross-linked polyolefin (XLP).
Pair:	Conductors twisted together with a drain wire and aluminum mylar shield.
Cable:	Shielded pairs cabled together with fillers as needed to form a round core. An overall aluminum mylar shield and drain wire is applied over the core.
Color Code:	Pairs are color coded per thermocouple type with pair number printed on the negative (red) conductor. See chart on back for specific color codes.
Jacket:	Black, flame-retardant, sunlight resistant, ER rated Chlorinated Polyethylene (CPE).
Options:	Available with class B stranding per ASTM B174. Available with color coded jacket.

---

For use as a 600 volt, multi pair thermocouple instrumentation cable where flame-retardance, and moisture/chemical resistance is critical. Cable can be installed in free air, in raceways or direct burial. The cable is also approved for wet or dry locations as well as Class 1 Division II industrial hazardous locations per NEC 501-4(b) for (UL) Type tray cables (TC).

---

Temperature rating of 90°C wet or dry. Insulation provides excellent electrical, thermal, and physical properties, excellent flame resistance and resistant to crush, compression, cuts and heat deformation. Also conductor insulation provides good low temperature (-40°C) cold bend characteristics.

---

Insulated Conductor: – VW-1
Cable: – Direct Burial, sunlight resistant, ER rated
UL Type TC, 90°C Wet or Dry, 600V
Passes UL 1277 Flame Test (70,000 BTU/hr)
Passes IEEE 383 Flame Test (70,000 BTU/hr)
ICEA S-82-552, 90°C Wet or Dry, 600V
Passes IEEE 1202 Flame Test (70,000 BTU/hr)
Passes ICEA T-29-520 Flame Test (210,000 BTU/hr)

---

XLP/CPE Thermocouple Cable

AWG	Number of Shielded Pairs	Insulation Thickness	Jacket Thickness	Overall Diameter	Weight lbs/1000 ft
20	1	0.025	0.045	0.270	35
20	2	0.025	0.045	0.430	70
20	3	0.025	0.045	0.450	85
20	4	0.025	0.045	0.500	105
20	6	0.025	0.060	0.600	160
20	8	0.025	0.060	0.670	210
20	10	0.025	0.060	0.735	240
20	12	0.025	0.060	0.790	280
20	16	0.025	0.080	0.890	360
20	24	0.025	0.080	1.060	500
18	1	0.025	0.045	0.300	50
18	2	0.025	0.045	0.480	90
18	3	0.025	0.045	0.510	115
18	4	0.025	0.060	0.595	165
18	6	0.025	0.060	0.670	220
18	8	0.025	0.060	0.750	280
18	10	0.025	0.060	0.820	340
18	12	0.025	0.080	0.930	430
18	16	0.025	0.080	1.045	540
18	24	0.025	0.080	1.235	760
16	1	0.025	0.045	0.325	60
16	2	0.025	0.045	0.570	130
16	3	0.025	0.060	0.600	160
16	4	0.025	0.060	0.660	200
16	6	0.025	0.060	0.740	270
16	8	0.025	0.060	0.880	380
16	10	0.025	0.080	0.970	460
16	12	0.025	0.080	1.035	530
16	16	0.025	0.080	1.165	570
16	24	0.025	0.080	1.400	960

Dimensions and weights shown are nominal, subject to industry tolerances. Dimensions and weights for other cable configurations are available upon request.

EX – Color Code	Chromel (Positive) Constantan (Negative)	PURPLE RED
JX – Color Code	Iron (Positive) Constantan (Negative)	WHITE RED
TX – Color Code	Copper (Positive) Constantan (Negative)	BLUE RED
KX – Color Code	Chromel (Positive) Alumel (Negative)	YELLOW RED

Tel: 1-800-645-9473
Fax: 717-845-2501
Email: sales@continentalwire.com